Re: RE: going from 3.90 to 4.10 gears

From: KURTZ ERIC (erics5.9@home.com)
Date: Sat Aug 14 1999 - 15:55:20 EDT


  I really dont know! I was just asking!lol, I would have to see it
bolt up to believe it I guess, but shoot that would be great!
Eric

Aaron wrote:
>
> your scaring me, I was assuming that the one everyone was talking about a
> while back in summit will fit. They are supposed to have a 5-speed and a
> 6-speed? was I wrong?
>
> ----- Original Message -----
> From: KURTZ ERIC <erics5.9@home.com>
> To: <dakota-truck@buffnet.net>
> Sent: Saturday, August 14, 1999 3:30 AM
> Subject: Re: DML: RE: going from 3.90 to 4.10 gears
>
> > Im assuming that you found one that will bolt up to our magnums? Whats
> > the part number and cost, this sounds pretty interesting.
> > Eric
> >
> > Aaron wrote:
> > >
> > > I plan on putting in a borg warner six speed, so hopefully that will
> help.
> > >
> > > ----- Original Message -----
> > > From: Bernd D. Ratsch <bernd@texas.net>
> > > To: <dakota-truck@buffnet.net>
> > > Sent: Friday, August 13, 1999 9:53 PM
> > > Subject: RE: DML: RE: going from 3.90 to 4.10 gears
> > >
> > > > For wheelin' or 1/4 miles...YES. For fuel economy (if you
> care)...nope.
> > > >
> > > > Bernd D. Ratsch
> > > > Pflugerville, TX
> > > > 1997 Dodge Dakota SLT/CC - 2WD
> > > > http://lonestar.texas.net/~bernd/Dakota.htm
> > > > bernd@texas.net
> > > >
> > > > -----Original Message-----
> > > > From: owner-dakota-truck@buffnet4.buffnet.net
> > > > [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of Aaron
> > > > Sent: Friday, August 13, 1999 6:56 PM
> > > > To: dakota-truck@buffnet.net
> > > > Subject: Re: DML: RE: going from 3.90 to 4.10 gears
> > > >
> > > >
> > > > what about 3.55's to 4.10's? worth it?
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: KURTZ ERIC <erics5.9@home.com>
> > > > To: <dakota-truck@buffnet.net>
> > > > Sent: Friday, August 13, 1999 6:30 PM
> > > > Subject: Re: DML: RE: going from 3.90 to 4.10 gears
> > > >
> > > >
> > > > > You will notice a slight difference, I made that change, but not a
> > > > > very big one. I wouldnt go back to 3.90 if I had to. I want
> realllllly
> > > > > bad the 4.30, but no one has em. Richmond stopped making them for
> > > > > 8.25's. Mancini had them listed on the net, but when I called them
> they
> > > > > didnt know much about it. He said it was something like an internet
> > > > > special!?!?
> > > > > Eric
> > > > >
> > > > > Kabuki2@aol.com wrote:
> > > > > >
> > > > > > In a message dated 8/12/99 10:59:33 PM Eastern Daylight Time,
> > > > > > TEDSDAKOTA@aol.com writes:
> > > > > >
> > > > > > << Hey Bernd, lift a tire, I can't just had major surgey. Is
> the
> > > > switch to
> > > > > > 4.10's worth it ??
> > > > > > Ted O,
> > > > > > >>
> > > > > >
> > > > > > going from 3.90 to 4.10 isn't going to provide much difference...
> try
> > > > going
> > > > > > to a 4.30 if you want to notice a difference... 4.56 would be
> better -
> > > > but I
> > > > > > would only advise that if you don't care about your fuel economy,
> > > > because
> > > > > > you'll probably be spinning some Rs just to cruise at 75mph with
> those
> > > > > > gears...
> > > > > >
> > > > > > imagine the nice holeshot though.... :-)
> > > > > >
> > > > > > ttyl
> > > > > > Patrick
> > > > >
> > > >
> > > >
> > > >
> >



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:15:48 EDT