RE:Subject: Re: Dyno Check RD 52mm TB vs Stock

From: Markram123@aol.com
Date: Sat Aug 28 1999 - 01:36:30 EDT


in patricks defense!!!whenever you make a modification...especially with
something as important as the throttle body...you need matching components
and a custom program for that change(add 1.7 rockers to the mix and be
amazed)...i agree put the air temp sensor in a cooler place and let the
air/fuel richen up a bit and you will see an improvement in horsepower...what
you really want to look at is the upper rpm power range i can gaurantee with
certainty that the RD throttle body will pull away from the asthmatic stock
throttle body in the upper rpm range..it will also enable you to run at
higher rpms and shift at higher shift points!!!



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:04 EDT