No problem Boog! Did you get a chance to check out
that article?
--- BoogYT1300@aol.com wrote:
> In a message dated 9/9/99 8:04:40 AM Pacific
> Daylight Time, schred1@yahoo.com
> writes:
>
> <<
> Bore Spacing = 4.09"
> Basic Bore Size = 3.66"
> Roundness = Max of .00015"
> Taper = Max of .0006"
> Stroke = 3.405"
> Rod/stroke ratio = 1.80
> Intake valves = 1.89"
> Exhaust valves = 1.46"
>
> I'm totally engine illiterate myself, so this might
> not make any sense! I just extracted this from the
> Mopar Action 4.7L article which you can download
> from
> the DML attatchments (schred1@yahoo.com folder)
> Theres a whole ton of other info in there that
> makes
> just about as much sense to me as the above so you
> might want to take a gander at it! (BTW - it's
> alot
> easier to read if you print it out - scanned)
> >>
> thanks Nate! Now to the Dyno 2000!
> Boog
>
__________________________________________________
Do You Yahoo!?
Bid and sell for free at http://auctions.yahoo.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:40 EDT