Re[2]: RE: Re: Knocking noise coming from steering

From: fawcett@uism.bu.edu
Date: Fri Sep 10 1999 - 14:19:20 EDT


Hey, what's a year between friends? Besides, I can't remember anything before
'97! :~) I'll go back to my original post that R&P was available on a '99 4x4
'cause somebody on the list has one with it... Maybe he would be willing to
pull it off his truck and mail it around so we can be absolutely sure? hehehe
:-)
Tom

____________________Reply Separator____________________
Subject: Re: DML: RE: Re: Knocking noise coming from steering
Author: <dakota-truck@buffnet.net>
Date: 9/10/99 12:05 PM

In Bernd's original message, he mentioned checking the rack (after the wheel
bearings) I know he's got a 2wd, I thought 4x2 Dak's got rack-and-pinon
starting with the '97s... and the 4x4s got it in '00...

but I could be wrong... And I like to know when I am, so I'm not anymore...
:-)

Gary Shook

>Isn't 2000 the first year for rack and pinion on the 4x4??

<snip>>
>
>Depends if your talking 4x2 or 4x4... Rack and pinion wasn't available on
>4x4's
>until '99... The 4x2's always had it.
>Tom
>
>____________________Reply Separator____________________
>Subject: DML: RE: Re: Knocking noise coming from steering
>Author: <dakota-truck@buffnet.net>
>Date: 9/10/99 9:41 AM
>
>Actually rack and pinion was not availible untill 99.
>
>Jason
>
>
>
>
>I don't see shocks on that list... the top nut on the shock coming loose is
>very common on the Rams, don't know if it could carry over to the Dak's..
>
>also the steering shaft is a problem with Dodges... so much so that
Borgesen
>makes a beefed up replacement that's popular with the Rams after they've
>replaced 2 or 3 under warranty (but I've never had the problem).
>
>You've got rack-and-pinon, so it can't be the pitman arm...
>
>good luck,
>
>Gary Shook
>
>
>>Need some help with this one:
>>
>>I've noticed a slight "knocking" noise in the steering wheel that only
>seems
>>to be happening when I turn the wheel. Doesn't happen when driving
>>straight. I've checked the upper and lower ball joints, end links,
>>tie-rods, steering coupler and joints, sway bar mounts, wheel bearings
>(just
>>wiggled the front tires), and the rack. Everything is tight and I can't
>>seem to find where this is coming from.
>>
>>I remember someone talking about this (TSB?) a while back but can't seem
to
>>find the email thread. Does anyone know of this or actually have the TSB
>>anywhere?
>>
>>Thanks,
>>
>>
>>Bernd D. Ratsch
>>Pflugerville, TX
>>1997 Dodge Dakota SLT/CC - 2WD
>>http://lonestar.texas.net/~bernd/Dakota.htm
>>bernd@texas.net
>>ICQ: 39320084
>>
>
>
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:16:42 EDT