Doug, If you decide to modify your TB yourself, let a
machine shop open the ports for you. This will keep the
airflow balanced to the cylinders. Usually you can
get it done cheap $20-50 if you can find a shop thats
not to busy (mine was $20). The shaft and TB top can
be modified and cleaned up pretty easy. Polishing was
the fun part and really makes it look sharp. You can
look at some pics on the DML and other websites to
see what needs to be done. The bores are better left
to the pro's tho. Good luck!
GS -
98 5.2L 5spd
> I read the procedure on the DML sight to modify your TBI unit. It
> didn't sound TOO hard , and I have access to the equipment that was
> described, but they do say a picture is worth a thousand words. Does
> anyone have pictures posted showing the mod step by step? I know this is
> a lot to ask, but sometimes you just have to ask.
>
>
> Doug in Vermont
> 98 CC Sport, V6
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:17:01 EDT