right on.... i cut my cat off and put a piece of pipe in... cost me like
10 bucks... i get much better gas mileage and a bit more power... go
ahead and cut it off!!!!
mike k
>From: Eric Kurtz <Erics5.9@home.com>
>Reply-To: dakota-truck@buffnet.net
>To: dakota-truck@buffnet.net
>Subject: Re: DML: Cat Removal!!!!!!!!!!
>Date: Wed, 22 Sep 1999 05:42:09 -0700
>
>Seriously!? I removed my cat, and it aint going back! My kids breathe
>quite fine too!
>Al Gore. alias Eric
>
>Peter L Anthony wrote:
> >
> > How about leaving it alone so my kids can breathe???
> >
> > -----Original Message-----
> > From: Dester223@aol.com <Dester223@aol.com>
> > To: dakota-truck@buffnet.net <dakota-truck@buffnet.net>
> > Date: Wednesday, September 22, 1999 12:09 AM
> > Subject: Re: DML: Cat Removal!!!!!!!!!!
> >
> > >Interesting thing to think of. Clean out the Cat. Then weld a
>straight
> > pipe
> > >THRU the cat. That way. you don't have to rebolt it back on for
> > inspections..
> > >-Dester
> > >
> > ><< Im thinking of removing my cat and putting a pipe in
>there.
> > >I'd
> > > do it so i can bolt the Catylitic back in when i want to.(Flanges and
> > > reuseable gaskets.) Is this mod worth it? I know i'd get some mileage,
>but
> > > how much power can I expect to gain? It would cost me $140 to do this
>mod
> > in
> > > this way.
> > > >>
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:17:03 EDT