RE: RE: rise of the mighty premag/ Cecil Meet

From: Scott Miller (kmiller@cvn.net)
Date: Sun Apr 25 1999 - 08:16:29 EDT


I'll be there on october 16 for the Shelby meet, along with shane baker.
come on over

later

Scott Miller
Shelby Dakota #322
94 V-6 Dakota Sport

> -----Original Message-----
> From: owner-dakota-truck@buffnet4.buffnet.net
> [mailto:owner-dakota-truck@buffnet4.buffnet.net]On Behalf Of kris hines
> Sent: Saturday, September 25, 1999 5:41 AM
> To: dakota-truck@buffnet.net
> Subject: RE: DML: RE: rise of the mighty premag/ Cecil Meet
>
>
> hey guys if you decide to get to gether at cecil co drag way let
> me know so
> i can meet ya there i live in cecil co about 10 mins from the track
> later
> kris
>
>
>
> >From: "Wisotzkey, Rich" <Rich.Wisotzkey@gd-wts.com>
> >Reply-To: dakota-truck@buffnet.net
> >To: "'dakota-truck@buffnet.net'" <dakota-truck@buffnet.net>
> >Subject: RE: DML: RE: rise of the mighty premag/ Cecil Meet
> >Date: Thu, 23 Sep 1999 08:14:29 -0700
> >
> >
> >-----Original Message-----
> >From: BoogYT1300@aol.com [mailto:BoogYT1300@aol.com]
> >Sent: Wednesday, September 22, 1999 8:13 PM
> >To: dakota-truck@buffnet.net
> >Subject: Re: DML: RE: rise of the mighty premag/ Cecil Meet
> >
> >
> >In a message dated 9/22/99 5:36:41 AM Pacific Daylight Time,
> >Rich.Wisotzkey@gd-wts.com writes:
> >
> ><<
> > Mike,
> > Remember, I am down here in the flats of Ashburn. Give a
> holler sometime
> > and maybe we can get together someplace. I hope to be tearing my DAK
> >apart
> > in about 10 days. (My living room is starting to look like the stock
> >room
> > in a speed shop.) Hopefully this truck will be ready for a fall run
> > somewhere.
> > Rich >>
> >So Rich what are you putting on your truck? Cecil is a helluva
> track, but
> >a
> >
> >long drive to get here. If Yall want to come up, just letme know and I
> >will
> >
> >get ya there!
> >Boog
> >
> >OK Boog,
> > Let's see, there is a new Y-pipe to go along with my JBA
> headers, a set
> >of Mopar roller rockers, had to get a set of "Mopar Magnum"
> aluminum valve
> >covers to go along with them (he-he), a set of 24lb. injectors, and a
> >Hughes
> >cam w/springs and retainers. Oh yes, don't want to forget the M1 intake
> >with all the trimmings. I'm just about finished prepping the intake.
> >Hopefully will be ceramic coating it next week. Then it's tear-down and
> >installation time. :'B
> > I think that's all for this round. Once I get these parts installed,
> >I'll be looking for a track to see what it will do. I also want
> to dyno it
> >as well.
> >So what do you think?
> >Rich
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:17:09 EDT