Re: PLEASE help. 20 degrees engine advance.

From: Michael Sykes (msykes@su.edu)
Date: Thu Oct 07 1999 - 16:16:26 EDT


Dude, If you need a timin' chain, get the Mopar Performance double roller.... it's a good bit sturdier. SHould last a while...
you can get it at the dealer too =)

-mike d.

>>> <Dester223@aol.com> 10/05/99 11:31PM >>>
Yes. I got a code 47 (low battery voltage) code stored. My auto tech teacher
said the same thing. wonder how much the timing chain will cost.
-Dester

PS. kinda early? only 61k on the truck. but then again. I drive the hell
outta it

<< If your timing was 17 deg BTC at idle, you may have a prob. with timing.
 
 Could be in the dist gear, could be the timing chain, Now to reset your
 timing, you need something more than a scanner. You should find out whats
 causing the problem first.
 All i can say is from experience here. My ol 87 did this, I couldnt get a
 correct reading it was jumping around so much. Turned out I had about 13
deg
 offset because of the slack in my timing chain. Before I changed it, I
could
 wiggle it (the chain) back and forth.
 hope this helps
 Boog
>>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:17:45 EDT