RE: Re: Bad Ass Cammer...was First Drag strip test for the 4.7L! !!!!!!

From: Barret, Matt (MATT_BARRET@EARTHTECH.COM)
Date: Tue Oct 26 1999 - 07:53:27 EDT


BOOG
Red line is 5500 stock with a limiter coming in at 6000, and yes she is
still pulling at 5500!!
I pulled the entire air box system off last night to see what I have to work
with, I am engineering an induction system as we speak, when I get that
smoked out I will definitely post it to the DML.
Exhaust!! ahhh yes! can you say 3 inch with flowmaster!! I took some
pictures of the stock air intake system and also I have the dimensions of
the TB if anyone is interested! Also I plan to bypass the AC compr. with a
shorter belt and the new Dak's have a new electric fan from the factory, so
I will be trying to get this electric fan to operate all the time so I can
remove the clutch fan! Kenne bell makes the SC, little pricey, I'll stick to
the low dollar mods first.
Matt

-----Original Message-----
From: nosdakota [mailto:nosdakota@email.msn.com]
Sent: Tuesday, October 26, 1999 7:44 AM
To: dakota-truck@buffnet.net
Subject: DML: Re: Bad Ass Cammer...was First Drag strip test for the
4.7L!!!!!!!

15.1 completely stock is great. It took me a bigger motor and over a grand
in mods to pull my first low 15 second pass. The mods will come. there is
already a SC for them isn't there and a good exhaust can be custom built for
anything usually cheaper than buying a kit. I'm sure a home brew intake can
be conjured up for it. and last but not least Nitrous fits any motor.
How high is the red line on the motor? just curious Anyone got any specs?
Joe W.
87 Shelby Charger 13.9
98 Dakota 13.1
----- Original Message -----
From: <BoogYT1300@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, October 26, 1999 12:11 AM
Subject: DML: Bad Ass Cammer...was First Drag strip test for the 4.7L!!!!!!!

> In a message dated 10/25/99 7:00:16 PM Pacific Daylight Time,
> acolona@i-55.com writes:
>
> << yeah, but wait till you try and modify the thing. Can we say pain in
the
> A$$!!!!
>
> Aaron C.
>
>
> "give me pushrods, or
> give me death"
> >>
> Dude, its a pain intheass just to change the oil in the thing. But it runs
> better than my 92 318 Dak. Low end torque is not the same, but top end
Kicks
> Ass!
> I could get used to this motor...it has balls!
> (DOH! I set myself up for this one!)
> They should have made a 318 OHC motor.....
> Anyways...gonna try to get saturday Nov. 6th off
> Boog
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:19 EDT