Re: Dropkit for the Dak offered..your opinion?

From: Ryan Krokosinski (ryan@equinoxfinancial.com)
Date: Fri Oct 29 1999 - 00:00:44 EDT


Supposedly 5/8 inch in the front and 1 inch out back.

Ryan K
'99 R/T RC

Wesley Beck wrote:

> How much lower is an R/T than a regular dakota?
>
> >From: Toney <discman@home.com>
> >Reply-To: dakota-truck@buffnet.net
> >To: dakota-truck@buffnet.net
> >Subject: DML: Dropkit for the Dak offered..your opinion?
> >Date: Thu, 28 Oct 1999 19:55:49 -0400
> >
> >Finally scraped up enough money for a high quality-low riding drop kit.
> >1997 Reg Cab, Belltech 3 inch coil drop in front and Belltech 4 inch
> >hangers/shackle kit in back. Topped off with 4 Belltech Nitro-Active
> >Shocks. Took measurements today and have 3 concerns..
> >1. Bottoming out (bumpstops)
> >2. Tailpipe will be 4.5 inches off the ground
> >3. Diff. Case will be 3.5 inches from the ground
> >
> >of course i dont wanna damage these parts, but how much abuse can they
> >take?
> >Anyone have methods of protecting these parts from being mutilated?
> >
> > Thanks All,
> > Toney
>
> ______________________________________________________
> Get Your Private, Free Email at http://www.hotmail.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:27 EDT