So far...so good. I had to down-jet the Fuel side 1-2 steps due to a fuel
smell coming from the engine compartment. (Had a little bit too much fuel.)
The MSD Retard box is also working fine as well. Initially, it retards the
timing 4 degrees but the computer has relearned again and the initial timing
is back to normal.
I haven't installed a Air/Fuel meter yet (got my eye on the Intellitronix
Model) but will let you all know as soon as that's installed.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of BLKDG3@aol.com
Sent: Saturday, October 30, 1999 1:16 AM
To: dakota-truck@buffnet.net
Subject: DML: NX /Comp Problems?
Bernd,
Just curious, does anything need to be done to keep the computer happy
when using the NX system? Also, any problems with "rich" readings from
the
O2 sensors?
Thanks.
Guy
Scottsdale, AZ
'99 SLT, CC, 5.2L, Auto, 4x2, 3" Gibson, 14" K&N FIPK
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:18:34 EDT