powertrax is very much available for 8 1/4" axles, I had a set sittin on my
coffee table till I decided to replace the axle... grand total of $369 from
Summit (2nd day air)
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.4@88.95
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: Jason&Sarah <Jpm699@email.msn.com>
To: DML <Dakota-truck@buffnet.net>
Sent: Friday, November 05, 1999 4:40 PM
Subject: DML: Powertrax is here?!
> I was looking through a 4 wheel'in magazine at the store and saw an ad for
> powertrax. They showed some part numbers that were available for Chyrsler
> 8.25 rear ends. Does this mean that there are now powertrax lockers
> available for our daks?!
>
> Jason
>
>
>
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:07 EDT