Does this computer require the dealer to flash the new VIN number into it?
What's the cost without the core?
-----Original Message-----
From: Markram123@aol.com [mailto:Markram123@aol.com]
Sent: Monday, November 15, 1999 2:11 PM
To: dakota-truck@buffnet.net
Subject: DML: 1997(only) 5.2/auto custom programmed computer for sale!!!
i have a 1997(only) dakota 5.2/ automatic/ custom programmed computer for
sale!!!! i had a ram but was sent the wrong box so i thought one of you guys
would want it!!!
Heres the specs!!
Top speed limiter is 199 mph
all delays are removed-instant throttle response
raised idle to 900 rpm(full charge for underdrive pulleys)
raised rev limiter to 6500
raised shift points to 5600 rpm
calibrated for larger injectors (24-30lbs will work) will work with stock
injectors perfectly also
leaned out at idle( emissions legal on even the most wild setups)
will work on supercharged engines up to 10lbs or nitrous up to 150hp with no
detonation
calibrated for higher lift cams but will work with stock perfectly
also calibrated for larger throttle bodies including the 4 barrel !!!
calibrated for 160 degree thermostat
now heres the best part!!! this is a $600 custom program, i only want $300
plus shipping and your original core !!!first come first served!!! This is
the same program i used in my 12 second Ram SST,,,will work with any mods
from mild to wild,including nitrous, superchargers,high lift cams,heads
etc!!! so if you have a modded out Dak or plan to do any performance mods
this is for you!!!
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:14 EDT