In a message dated 11/20/1999 11:27:54 PM !!!First Boot!!!, Kabuki2@aol.com
writes:
<< Is there room for improvement on the TB?? If not, how big is the bore on
the
manifold compared to the TB?
>>
i looked at mine and the bore seems to be the same as far as i can see. By
BTW my intake manifold is plastic. Im gonna do a dual intake using bent
tubing. i got a bender for conduit up to 3 inch and that does the mandrel
bending and im gonna run 2 tubes that meet in 1 tubbe that will bolt to the
tb unit and the air filters will actually be housed in the fender wells
Rob
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:20 EDT