Re: RE: Re: RE: spring clamps anyone?

From: Jon Smith (fast4x4@bellsouth.net)
Date: Mon Nov 22 1999 - 11:48:48 EST


yep, everyone I sent them to got 4 sets of clamps, 2 per spring.. BTW, you
CANNOT beat that with a nine iron.. already tried =)
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.4@88.95
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: Barret, Matt <MATT_BARRET@earthtech.com>
To: <dakota-truck@buffnet.net>
Sent: Monday, November 22, 1999 11:18 AM
Subject: DML: RE: Re: RE: spring clamps anyone?

> I read an article somewhere, and they recommended two sets of clamps( 2 on
> each side) anybody tried that??? that's great 9 bucks!! can beat that
with
> a nine iron.
> Matt
>
> -----Original Message-----
> From: Jon Smith [mailto:fast4x4@bellsouth.net]
> Sent: Monday, November 22, 1999 10:58 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: RE: spring clamps anyone?
>
>
> I made up several sets and sent them out, only to package them wrong and
our
> wonderful postal system lost a few... Maybe if there is interest enough,
> I'll make up a couple more sets, I have enough stock left over for
probably
> 2-3, maybe 4 sets. Total cost was $9.25, that was for materials, packing
> and postage I spent $8 on grade 8 mounting hardware which still came out
> less than 1/2 the cost of the Summit spring clamps.
>
> They didn't do a whole lot for traction, but totally killed ALL wheelhop,
> which is what they're designed for anyhow....
>
> So who else is interested??
> ____________________________________________
> Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
>
>
>



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 12:19:21 EDT