RE: pistons.. HELP!!

From: Michael Sykes (msykes@su.edu)
Date: Thu Dec 02 1999 - 19:10:09 EST


should be the same as a premag 318...
anyone?

-mike d.

88 6er with Slush-o-matic and 3.55 one-legged rear,
lowered, modded, and painted =)

http://members.xoom.com/dakotaperf/index.html

>>> <buckinghammk@nctsdg.navy.mil> 12/02/99 06:36PM >>>
I think its 68cc, but dont quote me.

Michael

-----Original Message-----
From: Michael Sykes [mailto:msykes@su.edu]
Sent: Thursday, December 02, 1999 11:12 PM
To: dakota-truck@buffnet.net
Subject: DML: pistons.. HELP!!

hey ya'll,

So, I'm tryin' to rebuild the mighty premag 6er, and during this process I
wanted to put 9.0:1 compression ratio forged pistons from Mopar Performance
in there to get some more power... well, my friends at Mopar decided to
discontinue these pistons, so I'm out of luck.... maybe....
so I call Jegs to see if they might have some 9.0:1 cr forged pistons, and
they ask me "what cc are your heads?"
uuummmmm.....
I dunno....

I checked my haynes manual, but to no avail. Can anyone tell me what cc my
heads are? It's an 88 TBI V6.

thanks in advance!

88 6er with Slush-o-matic and 3.55 one-legged rear,
lowered, modded, and painted =)

http://members.xoom.com/dakotaperf/index.html



This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:45 EST