Not much was involved to install the bottle, steel-braid hose, or
wiring...but the solenoids took a bit to figure out the best position. I
wound up using two Flex-A-Lite brackets and they bolted perfectly to the
manifold (side by side even). Total time was about 4 hours (with a few
breaks) and total cost was about $550 (w/bottle heater and extra jets that
didn't come with the kit). Extra costs were for the MSD Multi-Stage
Retards - $150 w/wire looms and custom connectors.)
My entire MSD system can be bypassed with one simple connector and put back
to the stock ignition...including the stock coil.
- Bernd
-----Original Message-----
From: owner-dakota-truck@buffnet.net
To: dakota-truck@buffnet.net
Subject: Re: DML: RE: Fw: Got 1/4 mile timeslips?? Let me know!!
Bernd, what was involved on your nitrous install? How much $ and time?
John,
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:52 EST