In a message dated 12/14/99 7:22:47 PM Eastern Standard Time,
ashort@flash.net writes:
<< Has anyone installed a MPI/M1 intake on a '98 w/ac?
I'm having trouble with the clearance between the a/c bracket and the
thermostat housing.
Please help if you can. >>
Alan
You have to cut the AC unit to clear the radiator hose. The article in the
Mopar mag that first installed a M1 shows the routine and it is necessary.
You alos lose some of the bracing to the Alt and AC. I fabbed up some new
braces which seem to work OK, nothing broke yet :-) It is a challenge fer
shurrrr....
Good luck
Bill
This archive was generated by hypermail 2b29 : Fri Feb 06 2004 - 11:47:55 EST