Re: Re: Dyno testing the 4.7L!!!!!!!!!!!!!!!!!!!

From: Bernd D. Ratsch (bernd@texas.net)
Date: Mon Jan 03 2000 - 14:05:26 EST


Geezus...$100?!?

I only have to pay $50 for the initial run and $10 for each run after that.

- Bernd

At 01:52 PM 01/03/2000 -0500, you wrote:
>Is the computer going to have time enough to adjust to those mods? Don't
>see how the intake would be that big of a difference, but if you were to get
>a TB by then, that would be a diff. story
>
>$100 for 3 runs is mighty steep.. see if the dyno shop will rent out all
>day for a flat rate, then get a group of ppl together to lower the rate.
>______________________
>Jon Smith----Raleigh, NC---
> fast4x4@bellsouth.net
>www4.ncsu.edu/~jdsmith4
>ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
>----- Original Message -----
>From: "Barret, Matt" <MATT_BARRET@earthtech.com>
>To: "'DML'" <dakota-truck@buffnet.net>
>Sent: Monday, January 03, 2000 1:15 PM
>Subject: DML: Dyno testing the 4.7L!!!!!!!!!!!!!!!!!!!
>
>
> > I just talked to the owner of Townsend Racing Products, They build NASCAR
> > chassis and race engines. Their facility is 2 miles from here (Richmond
> > VA)!! They have a Chassis Dyno available for $100 bucks an hour. The guy
> > said I should be able to get 3 test in one hour. (They were testing a 2000
> > Mustang GT today) So, now I need to figure out what I should change in
> > between tests? I already have a homemade K&N intake system on the truck.
>I'm
> > thinking I'll test it with air intake on and then test it with an open TB.
> > Then the third test????? I don't know, Maybe I'll go back to stock setup
> > first????
> >
> > Any suggestions? Damn!! I wish I had one of those TB's I've been hearing
>so
> > much about!!!!!!
> >
> > What do yall think????
> > __________________________________
> > Matt -- Mechanicsville, VA
> > `00 Sport Plus 4.7L 5spd. 9 1/4 3.92 LSD RC 2x4
> > Homemade K&N open element, Traction Bars,
> > Spring clamps, ... BEST 1/4 14.871 @ 91.01 MPH
> > ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
> >



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:25 EDT