----- Original Message -----
>From: "Tim Berry" <coolva1@home.com>
>To: <dakota-truck@buffnet.net>
>Sent: Tuesday, January 04, 2000 8:27 AM
>Subject: Re: DML: pulley
>
>I have a Sony/PPI system in my truck (2 10", and 2 6.5's) and the amps are
>300X1 RMS and 25x2 RMS.... Yes my voltage is below the 14 mark, but still in
>the safe, at night, I am suprised to find that my headlights DIM only when
>I'm above the 1,100RPM mark (Full Charge with the 2 pullies I got) I guess
>that could be because I have one heck of a big battery in it =)
>
>Still have yet to have any problems tho (Knock on Wood)
i have 4 10"s, and three amps pushing 700x1 each, total of 2100watts... i
can't afford the loss in voltage...
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Eric Giblock egiblock@hotmail.com
http://members.aol.com/dakotadogg DakotaDogg's Web Page
Get Paid to Surf The Internet ! (it works, i got a check)
http://www.alladvantage.com/go.asp?refid=EEX702
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:27 EDT