>Now for the other question. My Dak has the v6 in it. I got the Gibson
>before I was on the list and realized that the 3" was too big. My
>question is I have an adapter that goes from 3" to 2.5" pipe. If I were
>to put this on the outlet of the muffler and put a 2.5" tailpipe back
>on, would this get me the lost performance back, or would the outlet on
>the muffler have to be 2.5" as well.
I wanted to do the same thing too, but was told by my local muffler guy
that the stock pipe won't fit if you use an adapter. There isn't enough
room to put the adapter in as the stock pipe bends up almost immediately
after the muffler to go over the axle.
Steve
jsm@iglou.com
Lou-a-vull, KY
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:28 EDT