WHERE is this shop??? I'd sure like to rip em a good un =) they do not
know what they're talking about.
____________________________________________
Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
'95 318 auto CC 4x4: Accel Supercoil, JBA headers,
dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
MSD 8.5's, self-moded intake, 180 degree thermo,
ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
BEST: 0-60 in 6.3 & 1/4mi 15.4@88.95
207.2 RWHP, 276.2 RW ft/lbs
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: Jarman, Mike <JARMANM@stockhausen-inc.com>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, January 11, 2000 12:19 PM
Subject: DML: NC Emissions
> Just had my annual inspection done on my 98 QC ram. I took it to a shop
> close to my work NOT my reg. place. They gave me a hard time about my KN
air
> filter and assembly, SAID that under NC law that it was considered
tampering
> with the intake system. That since the factory box had the restrictive
fresh
> air intake hose I needed to keep that and coyuld not use the open air
style.
> Anyone else had this problem?
>
> Also check this the idiots thought i had tampered with the egr cause the
> hose runs from the evap cannister to the front about 6 feet and had a cap
on
> it. (its not a cap its a vent) they had to take a flashlight and look up
> into cause they thought it was a cap.
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:36 EDT