Damn, I guess it just depends on where you live. I live in western NC and
had many different vehicles inspected. Never once have they even opened the
hood. Of course where I normally go all I do is give them the make, model,
vin, and mileage and they give me the sticker (they never put it on
straight). But even when I don't go there they make me toot the horn and
check the signals and that is it.
----- Original Message -----
From: "Todd Flummer" <mustang@netunlimited.net>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, January 11, 2000 2:19 PM
Subject: DML: Re: RE: Re: NC Emissions
> I was just on Elm-Eugene about 20 mins. ago. Wasn't in the Dak. Had to
> pick up my new wheels. Going to put them on tonight. Should have pics in
a
> few days.
>
> Todd
> Mustang@netunlimited.net
> www.netunlimited.net/~mustang/
>
> ----- Original Message -----
> From: Jarman, Mike <JARMANM@stockhausen-inc.com>
> To: <dakota-truck@buffnet.net>
> Sent: Tuesday, January 11, 2000 12:56 PM
> Subject: DML: RE: Re: NC Emissions
>
>
> > Greensboro ,Elm-Eugene st. CASEYs off of I-40. if you are breaking down
i
> > wouldn't go there.
> >
> > > -----Original Message-----
> > > From: Jon Smith [SMTP:fast4x4@bellsouth.net]
> > > Sent: Tuesday, January 11, 2000 12:26 PM
> > > To: dakota-truck@buffnet.net
> > > Subject: DML: Re: NC Emissions
> > >
> > > WHERE is this shop??? I'd sure like to rip em a good un =) they do
not
> > > know what they're talking about.
> > > ____________________________________________
> > > Jon Smith-Raleigh,NC-http://www4.ncsu.edu/~jdsmith4
> > > '95 318 auto CC 4x4: Accel Supercoil, JBA headers,
> > > dual glasspack, 14x3 FABM, F&B Stage I TB, !EGR,
> > > MSD 8.5's, self-moded intake, 180 degree thermo,
> > > ASP crank pulley, 16" Hayden elec. fan, MP SBEC,
> > > BEST: 0-60 in 6.3 & 1/4mi 15.4@88.95
> > > 207.2 RWHP, 276.2 RW ft/lbs
> > > ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
> > > ----- Original Message -----
> > > From: Jarman, Mike <JARMANM@stockhausen-inc.com>
> > > To: <dakota-truck@buffnet.net>
> > > Sent: Tuesday, January 11, 2000 12:19 PM
> > > Subject: DML: NC Emissions
> > >
> > >
> > > > Just had my annual inspection done on my 98 QC ram. I took it to a
> shop
> > > > close to my work NOT my reg. place. They gave me a hard time about
my
> KN
> > > air
> > > > filter and assembly, SAID that under NC law that it was considered
> > > tampering
> > > > with the intake system. That since the factory box had the
restrictive
> > > fresh
> > > > air intake hose I needed to keep that and coyuld not use the open
air
> > > style.
> > > > Anyone else had this problem?
> > > >
> > > > Also check this the idiots thought i had tampered with the egr cause
> the
> > > > hose runs from the evap cannister to the front about 6 feet and had
a
> > > cap
> > > on
> > > > it. (its not a cap its a vent) they had to take a flashlight and
look
> up
> > > > into cause they thought it was a cap.
> > > >
> >
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:36 EDT