id be willing to split the cost with you/ronnie
http://www.smokindakota.com/dakotarul2/
DDBC,air ride 97 springs on a 95
----- Original Message -----
From: "GS-" <GSWillhite@ualr.edu>
To: <dakota-truck@buffnet.net>
Sent: Thursday, January 13, 2000 12:57 PM
Subject: Re: DML Cards was: DML: license plates
> Thanks Steven, I'll try a printer here and if it doesn't work
> out, I may have to send you an e-mail. 10,000 is a heck of a
> lot :) doubt if I could use them all. Not a bad offer except,
> I would want you to cut them. Color may be in order as I would
> want to grab their attention and depending on cost it might be
> more practical to go B&W.
>
> Thanks again
>
> GS -
>
>
> SmokinDakota wrote:
> >
> > Well if you don't want them to fancy, i.e. just black and white. I can
do
> > them for real cheap. I figure you can fit 10 on a sheet of card stock.
To
> > copy that in black in white it would cost around 4 cents if you order
more
> > than 1000 copies. So thats 1000 copies 10 up on a sheet = 10,000 cards
for
> > $40. However, if you want us to cut it there is an additional charge. If
> > anyone needs copy work check out my works website
www.alternativecopy.com.
> >
> > Steven 2me
> > http://www.smokindakota.com
> > AOL IM = SmknDakTrk
> > ICQ = 42763370
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:45 EDT