Ronnie, Thanks! I'm not sure which direction I want to
go here. Cards, especially color sound a little expensive. I
might go a flyer route?? with Preachers designs if he doesn't
mind. Nate has some good flyers for the DML as well. With a
color printer it would be cheaper to print out these color
designs, fold them and stick them under the windshield wipers.
The only bad thing is, I think people are less likely to throw
away a card as compared to a flyer. Printing up both seems like
a good Idea. In any occasion, thanks for the offer and I'll see
what I can come up with. BTW, shoot me any ideas! And this goes
for any DML'er.
GS -
ronniec wrote:
>
> id be willing to split the cost with you/ronnie
> http://www.smokindakota.com/dakotarul2/
> DDBC,air ride 97 springs on a 95
> ----- Original Message -----
> From: "GS-" <GSWillhite@ualr.edu>
> To: <dakota-truck@buffnet.net>
> Sent: Thursday, January 13, 2000 12:57 PM
> Subject: Re: DML Cards was: DML: license plates
>
> > Thanks Steven, I'll try a printer here and if it doesn't work
> > out, I may have to send you an e-mail. 10,000 is a heck of a
> > lot :) doubt if I could use them all. Not a bad offer except,
> > I would want you to cut them. Color may be in order as I would
> > want to grab their attention and depending on cost it might be
> > more practical to go B&W.
> >
> > Thanks again
> >
> > GS -
> >
> >
> > SmokinDakota wrote:
> > >
> > > Well if you don't want them to fancy, i.e. just black and white. I can
> do
> > > them for real cheap. I figure you can fit 10 on a sheet of card stock.
> To
> > > copy that in black in white it would cost around 4 cents if you order
> more
> > > than 1000 copies. So thats 1000 copies 10 up on a sheet = 10,000 cards
> for
> > > $40. However, if you want us to cut it there is an additional charge. If
> > > anyone needs copy work check out my works website
> www.alternativecopy.com.
> > >
> > > Steven 2me
> > > http://www.smokindakota.com
> > > AOL IM = SmknDakTrk
> > > ICQ = 42763370
> > >
> >
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:46 EDT