Kyle, you can reuse the castle nut, but you really should use a new cotter
pin. Cheap insurance.
______________________
Jon Smith----Raleigh, NC---
'95 4x4 318 auto CC
fast4x4@bellsouth.net
15.4@89.5mph
www4.ncsu.edu/~jdsmith4
ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
----- Original Message -----
From: "Kyle Kozubal" <grndak4x4@home.com>
To: <dakota-truck@buffnet.net>
Sent: Thursday, January 13, 2000 7:21 PM
Subject: DML: Re: Re: Pitman Arm 101(Once Again)
> Well I just got back from Pep Boys with a $25 pitman arm. The guy on the
> phone told me it was made by TRW, but it isnt. Even better, it is a
'Perfect
> Circle' chassis part made by Dana. I am really happy I could get a pitman
> arm made by such a quality company as Dana. Question now though, do I
re-use
> the large nut which is currently holding the stock pitman arm onto the
> pump's shaft as well as the nut/cotter pin which connects the arm to the
> cross rod? Should I have gotten new ones in the box with the new pitman
arm?
> Thanks once again fellas......
> Kyle
> 93 Dakota 4x4 V6
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:46:45 EDT