I used a DMJ 3/5 drop.
----- Original Message -----
From: Stlaurent Mr Steven <STLAURENTS@mctssa.usmc.mil>
To: <dakota-truck@buffnet.net>
Sent: Monday, January 24, 2000 1:50 PM
Subject: DML: RE: Re: RE: Re: Backspacing
> 18x9 or 18x10, who does make these rims (chrome spoke type)? Running 45
> series, did it lowered you stance on both ends by 4 inches?
>
> -----------------------------------------------------------------
> Steven St.Laurent
> Test Engineer
> Test Branch, GSD,MCTSSA
> MARCORSYSCOM, US Marine Corps
> mailto:stlaurents@mctssa.usmc.mil (work)
> mailto:Saint1958@home.com (home)
> Office: (760) 725-2296
>
> -----Original Message-----
> From: Todd Flummer [mailto:mustang@netunlimited.net]
> Sent: Monday, January 24, 2000 10:15 AM
> To: dakota-truck@buffnet.net
> Subject: DML: Re: RE: Re: Backspacing
>
> You could go with 17x9.5 on the rears with about 7 in's of backspacing
the
> 97's up will allow about 8 in's of bs). I'm running 245/45/17 on the
fronts
> and 275/40/17's on the rear with BFG Comps tires.
>
> Todd
> Mustang@netunlimited.net
> www.netunlimited.net/~mustang/
>
> ----- Original Message -----
> From: SmokinDakota <webmaster@smokindakota.com>
> To: <dakota-truck@buffnet.net>
> Sent: Monday, January 24, 2000 11:25 AM
> Subject: DML: RE: Re: Backspacing
>
>
> > So to tuck in the rear should I stay with a 17x8 and the 5 1/2
> backspacing?
> > What size tires are you running? 255/50/17's?
> >
> > Steven 2me
> > http://www.smokindakota.com
> > AOL IM = SmknDakTrk
> > ICQ = 42763370
> >
> > -----Original Message-----
> > From: owner-dakota-truck@buffnet.net
> > [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Todd Flummer
> > Sent: Monday, January 24, 2000 6:17 AM
> > To: dakota-truck@buffnet.net
> > Subject: DML: Re: Backspacing
> >
> >
> > Steve,
> >
> > On my new 17's which are 17x8 in the front and 9.5 in the back the
> > backspacing is 5 1/2 and 6 1/2. The fronts are tucked in the wheel
well.
> > The rears are right under the fender lip which is fine with me since I'm
> > running R/T flares. I'll have some pics as soon as all this snow melts.
> >
> > Todd
> > Mustang@netunlimited.net
> > www.netunlimited.net/~mustang/
> >
> > ----- Original Message -----
> > From: SmokinDakota <webmaster@smokindakota.com>
> > To: Dakota-Truck <dakota-truck@buffnet.net>
> > Sent: Sunday, January 23, 2000 9:56 PM
> > Subject: DML: Backspacing
> >
> >
> > > I am getting ready to purchase some new wheels. I want them to tuck
> > > completely under the wheelwells. My question is what kind of
backspacing
> > am
> > > I looking at? I think I remember the bolt pattern being a 6x4.5. . .
> > > correct? I am looking at a 17" or 18" or even possible some 20"s.
Would
> > the
> > > backspacing differ on each size rim? And it a 97 v6 dak.
> > >
> > > Steven 2me
> > > http://www.smokindakota.com
> > > AOL IM = SmknDakTrk
> > > ICQ = 42763370
> > >
> >
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:01 EDT