I'll just wait for yours, sounds like a good deal. Do you know what kind of
HP and Torque gains we're looking at here? At what RPMS is this designed
for?
Jason
.
>
> Koller Dodge (http://www.kollerdodge.com) is probably about the cheapest
>place you'll find it. West Oaks Dodge is usually right in the same
ballpark.
>(http://www.westoaks.com) Expect to pay about $220. I believe the part
number
>is P5249816.
>
> Keep in mind that this will only get you the manifold, TB adaptor, and
>intake to head gaskets. You will also need, at the very least, a new
t-stat
>housing and an intake manifold gasket kit (available from a parts
>counter). Additionally, if you want to install it on a street vehicle
>(especially with A/C), there are some other things you'll need to either
>buy or fabricate.
>
> As everyone no doubt knows by now, I'm working on a kit which will
>provide beter installation instructions as well as the extra fabricated
>pieces that you can't buy at a parts store. It got sidetracked by
>stickers and calendars; I'm currently working on the install instructions
>but I hope to make it available soon. (There are more differences between
>model years than I had originally anticipated.)
>
> -Jon-
>
> .--- jon@dakota-truck.net -- or -- stei0302@cs.fredonia.edu ------------.
> | Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
> | '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447 |
> `---------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:02 EDT