RE: warming up

From: Bernd D. Ratsch (bernd@texas.net)
Date: Tue Feb 01 2000 - 08:54:46 EST


Your correct.

It take the same amount of time to "warm up" with a 180 as with a 195. Only
difference is that the 195 opens up at 200 and the 180 thermostat doesn't
open up until 185 degrees.

- Bernd

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Chad Clifton
Sent: Tuesday, February 01, 2000 6:26 AM
To: dakota-truck@buffnet.net
Subject: Re: DML: warming up

I'm not sure I understand the concept behind a 180° thermostat causing a
truck to warm up slower than one with a 195° thermostat. It is my
understanding, that the thermostat stays closed until the stat
temperature is reached, such as 195° or 180°. Would not 180° be warm? I
have a 180° thermostat and can tell no difference in warm up time. Sure,
the needle isn't up quite as high, but it's up just as high as it was
during any other month when it just reached 'warmed up' status. The
heater gets nice and toasty in no time. Now, granted, I do live in North
Georgia, but it still gets pretty cold down here. Was about 19°F out
when I started her up a few days ago. Warmed up fine. Started up fine.
Damn good truck. :)

Chad Clifton
mcc@negia.net
'95 DSCC 5sp v6, mobil 1 fully synthetic, champion truck plugs,
removed front air blocker at grill, dynomax race mag muffler,
super high flow cat, K&N drop-in, etc..

"mike d." wrote:
>
> >>I have replaced the thermostat with a 180° <<<
>
> that's your problem =)
>
> on a stock 6er, the factory 195 is all you need... the 180 will help in
> the summer, but it'll really hurt ya' in the cold...
> I have a stock 195 with a JET II and many mods and I run nice and cool
> and don't ping...
>
> -mike d.
>
> ---> Yorktown, Va.
> 88 LE slammed, painted, and PARKED =(
>
> miggitymike@juno.com
> http://members.xoom.com/dakotaperf/index.html
>
> ________________________________________________________________
> YOU'RE PAYING TOO MUCH FOR THE INTERNET!
> Juno now offers FREE Internet Access!
> Try it today - there's no risk! For your FREE software, visit:
> http://dl.www.juno.com/get/tagj.



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:51 EDT