I ran my sensor for my Flexalite 210's into the top vein of the radiator
on the passenger side. Pushed it right in the corner, outside the
radiator.
The bulb is 99% covered by the radiator cooling fins and reads the heat
well. It cycles at 190 degrees with no trouble and no chance of a leak.
If you chose to install the temp sensor in the hose, be sure to
electrical tape the whole neck with a wrap or 2. This should keep any
leaks from starting.
Alan S.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:53 EDT