RE: Dyno Runs at Colvin Automotive (Bernd)

From: Steve St.Laurent (saint1958@home.com)
Date: Sat Feb 05 2000 - 20:08:52 EST


Go GO G OOOOOO! Bernd.....

=================================
Steve St.Laurent
2000 DC Dakota 4.7, CC, 4x2, 3:55 (soon 330HP)
2000 Roush Mustang Stage I (awaiting the new SC)

-----Original Message-----
From: owner-dakota-truck@buffnet.net
[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Bernd D. Ratsch
Sent: Saturday, February 05, 2000 2:08 PM
To: dakota-truck@buffnet.net
Subject: DML: Dyno Runs at Colvin Automotive

Ok...so I'm a little bit ecstatic about the results:

Run #1 (No Nitrous and No eRams)
Max HP = Measured: 143.1 / Corrected = 137.9
Max TQ = Measured: 197.6 / Corrected = 190.4

Run#2 (70HP Nitrous Shot and No eRams)
Max HP = Measured: 202.2 / Corrected = 194.9
Max TQ = Measured: 330.9 / Corrected = 318.9

Run#3 (100HP Nitrous Shot and No eRams)
Max HP = Measured: 232.6 / Corrected = 225.1
Max TQ = Measured: 394.5 / Corrected = 381.7

The 70HP shot is what I normally run with and the HP figures are (on all)
almost "Dead On" with what the G-Tech was showing.

George, Thank You for putting this together. A lot of nice
Firechickens/Cramaros...uhhhh I mean GM vehicles were there. And as for the
Turbo V6 Firebird...sorry buddy, I got ya. ;)

Bernd D. Ratsch
Pflugerville, TX
1997 Dodge Dakota SLT/CC - 2WD
http://lonestar.texas.net/~bernd/Dakota.htm
http://www.mopars.net/dak/bernd/
http://www.toycrusher.com
bernd@texas.net
ICQ: 39320084

"Have I gone too far...Or has Toyota not gone far enough!"



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:55 EDT