At 11:13 AM 2/7/2000 -0600, you wrote:
>i dont have a tag on my 95 4x4 how do i tell the gear ratio in the rear and
>the size/
> http://www.smokindakota.com/dakotarul2/
>DDBC,air ride 97 springs on a 95
Get yourself some chalk or a wax/grease pencil. Jack up one rear tire so
only one tire can spin. Mark a line on the tire. Put the transmission in
neutral (both standard and automatic). Now spin the tire while counting
the number of turns the tire takes to make one complete revolution of the
driveshaft. The number of tire revolutions it takes to make one complete
revolution of the driveshaft is your rear end gear ratio. If you have a
locker or LSD, get both rear tires off the ground.
Mike
__________________________
mschwall@flash.net
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:57 EDT