lets take this step by step/////firts you needto tell me this when you are
looking at that bench seat you see a rail bolted to the seat and the floor
right ok is there a mounting place near the hump first step
http://www.smokindakota.com/dakotarul2/
DDBC,air ride 97 springs on a 95
----- Original Message -----
From: "Kyle Kozubal" <grndak4x4@home.com>
To: <dakota-truck@buffnet.net>
Sent: Tuesday, February 08, 2000 5:29 PM
Subject: DML: Seats/Bolts
> I might soon be swapping out my bench seat for some buckets. I have never
> unbolted my Dak's seats so I have some questions. Dont laugh now(too
hard),
> as some of these questions might be basic knowledge to some. First, the
> seats are mounted onto the seat rails. Are they just bolted onto these
> rails? Is the hardware for these common bolts/nuts are am I only going to
be
> able to get them at the dealer? The rails then are what the seat slides
back
> and forth on and these rails are 'bolted' to the floorboards, correct? Are
> the bolts which bolt the rails to the floorboard common hardware or an
> dealer only item? Also, concerning the bolts/hardware which actaully
attach
> the seat rails/mounts to the floorboards.....are they just like self
tapping
> bolts or how do they work? Will I need to buy some type of speednut or
> anything for the bolts to securely fasten to the floorboards? Thanks for
any
> and all info on this
> Kyle
> 93 Dakota 4x4 V6
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:57 EDT