At 11:43 PM 2/8/2000 -0600, you wrote:
>Motec (www.motec.com) makes an Engine Control Unit that is make/model
>agnostic and is supposed to be the absolute best there is in terms of
>flexibility, but it takes a boat-load of time to get it working right.
>I've read articles where folks have had to modify many of the sensors to
>get them within the valid reading range for the ECU.
>
>But, many of the guys who drag race high-boost turbo vehicles (the late
>model Supra's and RX-7's) swear by them, and some are running 25+lbs of
>boost from stock blocks and cranks. The ECU's gotta be pretty good to
>let those guys get so close to the ragged edge of blowing the block to
>schrapnel.
>
>Kurt
Pretty hi-tech 'puter. Probably die of sticker shock though.
Mike
__________________________
mschwall@flash.net
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:58 EDT