I don't want to say they are too much, but I won't say you'll really benefit
from them. You're still running the stock PCM which is really going to be a
major limiting factor. The factory injectors (19lb'ers I think) are still
adequate for your mods. If you went with a modified PCM and intake on top
of your current mods, I believe you would get a performance return from the
24lb injector.
Don't hold this as pure gospel, as I am speaking strickly from memory. I'm
at work and not able to check or validate any numbers.
Rich - Ashburn, VA
-----Original Message-----
From: Bluethunder318@aol.com [mailto:Bluethunder318@aol.com]
Sent: Wednesday, February 09, 2000 9:13 PM
To: dakota-truck@buffnet.net
Subject: Re: DML: 24# injectors
Would #24lbs injectors be too much for the following mods on a 98 318?......
K+N Gen2
R+D TB
Mopar Headers
Flowmaster cat-back
Mopar cam,roller rockers,valve springs
Minor head work(clean up,bowls,minor porting etc.)
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:59 EDT