Mike,
If you are running stock or fairly close to it, I would invest the money
into other mods prior to the injectors. (Unless you run across a price you
just can't replicate in the future.) The stock injectors are more than
sufficient until you hit the 300-325hp range (going from memory; don't have
formula handy to calculate). I'd concentrate on increasing the aspiration
abilities of your engine before considering larger injectors.
Rich - Ashburn, VA
-----Original Message-----
From: mike d. [mailto:miggitymike@juno.com]
Sent: Wednesday, February 09, 2000 7:08 PM
To: dakota-truck@buffnet.net
Subject: DML: attn: Rich -----> 24# injectors
>>What I wound up doing was buying a slightly used set off the Corral
website.
I bought a set of 24lb. Motorsport injectors with around 15Kmi on them
for
$100 (no shipping).<<
I know there isn't much improvement on injectors, but would you recommend
this mod?
I want to get the most out of the 360 that's goin' into the premag...
just curious =)
-mike d.
---> Yorktown, Va.
88 Dakota LE: slammed, painted, and PARKED =(
miggitymike@juno.com
http://members.xoom.com/dakotaperf/index.html
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:59 EDT