In a message dated 2/10/00 4:02:45 AM Eastern Standard Time,
editzero@yahoo.com writes:
> wait .... so what your trying to tell me is that it
> will be easier to grind off the rivets and knock them
> out with a air chisel than taking out 4 bolts and
> swapping shackels
> Frank
> 94 3.9 sport
>
> > If you're only going 2 inches in the back, it'll be
> > alot easier to go with
> > the hangers up front of the spring. Bell Tech and
> > Western Chassis make em.
> >
> > Kelly in SC
> > '96 CC 5.2
On my truck they are all riveted. Either way you go, you'll probably need a
shim to realign your pinion angle.
Kelly in SC
'96 CC 5.2
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:47:59 EDT