Thanks chief,
I found that about 15 minutes after I posted the message, live and learn!!
Josh Brown, MCSE
Microsoft Messaging
After Hours Duty Manager
A-Jobro@microsoft.com
Work Hrs: 2000 - 0700 Hrs, Sat. - Tues. CST
-----Original Message-----
From: The Man From Utopia [mailto:tmfu@home.com]
Sent: Sunday, February 13, 2000 10:32
To: dakota-truck@buffnet.net
Subject: DML: RE: RE: Cracking rc5 - DML team
>
> I got set up and was all set to start but the Gestapo here
> have port 2064
> locked up, I will try and see if I can select a different
> port to send it
> out on, I have a two assigned to me, if not oh well!!!!
>
Go into the configuration, select 2 then 6, you can change the Keyserver
port to 80 and bypass the firewall. There is a READ.ME file that explains
how to get past MS Proxy. It works because @work we use MS Proxy and I also
have it on my server @home.
distributed.net client configuration:
--------------------------------------------------------------------------
1) General Client Options
2) Buffer and Buffer Update Options
3) Performance related options
4) Logging Options
9) Discard settings and exit
0) Save settings and exit
Choice --> 2
distributed.net client configuration: Buffer and Buffer Update Options
--------------------------------------------------------------------------
1) Buffer in RAM only? (no disk I/O) ==> no
2) In-Buffer Filename Prefix ==> buff-in
3) Out-Buffer Filename Prefix ==> buff-out
4) Checkpoint Filename ==>
5) Disable buffer updates from/to a keyserver ==> no
6) Keyserver<->client connectivity options
7) Disable buffer updates from/to remote buffers ==> no
8) Remote buffer directory ==>
9) Frequently update empty buffers? ==> no
10) Preferred packet size (2^X keys/packet) ==> RC5=-1,DES=-1,CSC=-1
11) Fetch:flush work threshold ==> RC5=-1:-1,DES=-1:-1,OGR=-1:-1,CSC=-1:-1
12) Fetch:flush time threshold (in hours) ==> RC5=0,DES=0,CSC=0
0) Return to main menu
Choice --> 6
distributed.net client configuration: Keyserver<->client connectivity
options
--------------------------------------------------------------------------
1) Network Timeout (seconds) ==> 60 (default)
2) Automatically select a distributed.net keyserver? ==> yes
3) Keyserver port ==> 80
4) Firewall/proxy protocol ==> HTTP
5) Firewall hostname ==> 192.168.0.2
6) Firewall port ==> 80
7) Firewall username ==> tmfu
8) Firewall password ==> ******
9) Always use UUEncoding? ==> no
10) Modem detection options ==> Normal mode
0) Return to Buffer and Buffer Update Options
Choice -->
Hope this helps...
Greg
95 DSCC v6 5spd
Rahway NJ
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:48:05 EDT