Re: Re: 5x7 to 6x9 mirror swap.

From: Joseph Council (joseph_council@yahoo.com)
Date: Fri Feb 18 2000 - 22:35:33 EST


Darren,
 I don't have power windows/locks either. I have a feeling that I don't
have the wire harness. I will check tomorrow. Could you post the part
numbers for the wire harness, switch, and the little 'nut' (hard one to
find!) that holds the switch to the door panel. I would appreciate it.

Thanks

Joe C

----- Original Message -----
From: "Darren Asuncion" <dakotaguy1999@yahoo.com>
To: <dakota-truck@buffnet.net>
Sent: Friday, February 18, 2000 9:49 PM
Subject: DML: Re: 5x7 to 6x9 mirror swap.

> Hi Joe,
>
> The 6x9 mirrors are all electric. I converted my 99 Dak to the power 5x7
in
> November. Kinda wish I did the 6x9 swap, might still do that in the
future.
> The installation procedure is the same regardless of mirror size. A
> dealership service dept. told me the swap wasn't possible, but I did it
> anyway, thanks to the help of the a different dealer's parts department
and
> some research. I've found that some Daks are prewired for the mirrors,
> you'll have to remove the door panels and take a look for yourself (there
> will be unused connectors by where the mirror mounts to the door). My Dak
> was not prewired (I don't have power windows/locks), so I had to buy the
> wire harnesses myself. If you need part numbers for the switch, wiring
> harnesses, and the little 'nut' (hard one to find!) that holds the switch
to
> the door panel - let me know. I'll find my reciept for all of it and post
> if you would like.
>
> Hope this helps!
>
> -Darren Asuncion in AK
> 99 Intenese Blue CC Sport +, 4x4, 5.2 V8, auto, 3.55 lsd
> http://www.geocities.com/dakotaguy1999/dakota.html
>
> > Date: Fri, 18 Feb 2000 13:18:54 -0500
> > From: "Joseph Council" <joseph_council@yahoo.com>
> > Subject: DML: 5x7 to 6x9 mirror swap.
> >
> > Of the guys that have switched out their 5x7 for 6x9 I have a couple of
> > questions.
> >
> > The 6x9 are they electrical or manual. If they are electrical did you
> have
> > to install the wiring or was it already there. I talked to my
dealership
> > and they said I could not swap the 5x7 manual that I have with the 6x9
> > electrical. What experience/problems have you guys had with the swap?
> >
> > Thanks
> > Joe C
> > Smithfield VA
> > 98 CC SLT
> >
> >
> >
> > __________________________________________________
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Talk to your friends online with Yahoo! Messenger.
> http://im.yahoo.com
>

__________________________________________________
Do You Yahoo!?
Talk to your friends online with Yahoo! Messenger.
http://im.yahoo.com



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:48:27 EDT