It's just 3" exhaust pipe bent into a 90 degree elbow. It carries nicely from
the air hat, above the headers and forces the filter right up against the
grill. The air box has got to go but I think you lost that a long time ago
like I did. I'll take it out and clear coat it after a few test runs.
If ya' want to go this route and have trouble finding it (as I did) I can tell
you who to order it from. Lemme know.
Tom
______________________________ Reply Separator _________________________________
Subject: DML: Re: Installed Po-Boy Air Intake Today
Author: <dakota-truck@buffnet.net> at smtpout
Date: 2/25/00 6:43 PM
Tom,
No, you're not the last of the hold-outs :) I am getting ready to fab
one up in the next week or so and was wondering what you wound up
with for the pipe. I'd rather not use PVC or ABS, but time will tell.
Thanks,
Chuck Robbins
'99 Sport v6 5spd 2wd RC
http://www.members.home.com/clrobbins
>snip<
Special thanks to Gilbert Vega for helping me track down the missing 3"
pipe I needed!
>snip<
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:48:49 EDT