Bernd,
Yep, it has the v6 specs in it. In fact I listed the v6 specs in the email
(still attached below your message.
DC never actually put the v6 in the Durango so I don't know if the FSM is
acurate or not on the V6 specs.
John.
>-----Original Message-----
>From: owner-dakota-truck@buffnet.net
>[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Bernd D. Ratsch
>Sent: Thursday, March 09, 2000 7:44 AM
>To: dakota-truck@buffnet.net
>Subject: DML: Re: RE: Stock 318 Cam specs?
>
>
>Hey John,
>
>Does the FSM have the V6 specs as well?
>
>- Bernd
>
>----- Original Message -----
>From: "John Mautz" <jmautz@home.com>
>To: <dakota-truck@buffnet.net>
>Sent: Wednesday, March 08, 2000 11:27 PM
>Subject: DML: RE: Stock 318 Cam specs?
>
>
>> Hi,
>>
>> According to my '99 Durango FSM here are the stock cam specs for the
>Magnum
>> engines.
>>
3.9 V6 Intake Exhaust
-------------------- -------- -------
Centerline 110 108
Advertised Duration 240 248
Open @ BTDC 10 N/A
Close @ ABDC 50 N/A
Open @ BBDC N/A 52
Close @ ATDC N/A 26
Gross Valve Lift w/1.6 .432 .432
Gross Valve Lift w/1.7 .459 .459
Lobe Separation Angle = 109
>>
>>
>> 5.2 V8 Intake Exhaust
>> --------------------- -------- -------
>> Centerline 115.5 109.5
>> Advertised Duration 251 261
>> Open @ BTDC 10 N/A
>> Open @ ABDC 61 N/A
>> Open @ BBDC N/A 60
>> Open @ ATDC N/A 21
>> Gross Valve Lift w/1.6 .432 .432
>> Gross Valve Lift w/1.7 .459 .459
>> Lobe Separation Angle = 112.5
>>
>>
>> 5.9 V8 Intake Exhaust
>> --------------------- -------- -------
>> Centerline 117.5 101.5
>> Advertised Duration 249 269
>> Open @ BTDC 7 N/A
>> Open @ ABDC 62 N/A
>> Open @ BBDC N/A 56
>> Open @ ATDC N/A 33
>> Gross Valve Lift w/1.6 .410 .418
>> Gross Valve Lift w/1.7 .435 .444
>> Lobe Separation Angle = 109.5
>>
>> Hope This helps,
>> John Mautz
>> '99 Durango SLT+, 5.9L, 4x4, 3.55 LSD, QuickD Air Intake, QuickD 51.75 mm
>> TB, Mesa Headers, Mesa 3" cat and 3" cat-back (Magnaflow), Dual
>Perma-cool
>> electric fans(1-14", 1-12"). Best 1/4 ET = 16.059@84.91
>>
>>
>> >-----Original Message-----
>> >From: owner-dakota-truck@buffnet.net
>> >[mailto:owner-dakota-truck@buffnet.net]On Behalf Of Tim Berry
>> >Sent: Wednesday, March 08, 2000 4:09 PM
>> >To: dakota-truck@buffnet.net
>> >Subject: DML: Stock 318 Cam specs?
>> >
>> >
>> >Anyone know the stock cam specs fer a Mag 318?
>> >__________________________________________________________
>> >Tim Berry -- Chesapeake, VA
>> >`97 SLT 318 auto CC 2x4 LSD:
>> >Dual Exaust w/Flowmaster, Homemade K&N GEN II, 16" Electric Fan
>> >180 T-stat, MSD 8.5 wires, Lakewood Traction Bars, F&B Stage 1 TB. Mod'd
>> >intake
>> >ASP Pullies (Crank/Alt), Trans Go Shift Kit, BFG 275/60's, Hypertech PTM
>> >(gettin fixed)
>> >BEST 1/4 15.488 @ 86.23 MPH
>> >ŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻŻ
>> >
>>
>>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:35 EDT