Nickel plated... it'll eventually lose its luster. The other option is
Ceramic Coated, which will look like the inside of an aluminum can...
forever.
Sam
> -----Original Message-----
> From: owner-dakota-truck@buffnet.net
> [mailto:owner-dakota-truck@buffnet.net]On Behalf Of Patrick Delgado
> Sent: Friday, March 17, 2000 5:31 PM
> To: dakota-truck@buffnet.net
> Subject: Re: DML: Durango headers in Dak R/T
>
>
> I signed up to the R/T list, but you guys and gals are my buds. Are
> those headers Stainless?
> Any more info is appreciated. Can you please send me Leach's # or addy?
> Dr. Pat
>
> Sam Parthemer wrote:
>
> > PAT Pat pat... we need to get you on the RT registry
> > since you're gonna have an RT.
> >
> > I can help put you in touch with the company that
> > makes the headers for '2000 RT (Positive Performance
> > Exhaust-- Leach).
> >
> > I am running the setup now for my '2000 RT, as my
> > truck was used as the prototype for the '2000 setup.
> > The final product, is near completion, and I'm going
> > to call right now to see if it is out. OTHERwise, if
> > you aren't going to lower your truck, you can run
> > their header, and Durango 4x4 Y-pipe... only a little
> > welding needed at the Y-pipe - to cat/no cat
> > connection. I'll post more info on that when I have
> > it. Pricing runs about $475.00 for standard nickel
> > plating, and another $160 or so for ceramic coating.
> >
> > sam '00 RT
>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:48 EDT