I'll soon be stuffing a locker in mine but it's an open diff. at the moment
so I can't comment on what's normal for noise with a lsd... I need to
pickup some RTV gasket maker myself. I'll probably just get whatever is
hyped to be oil/grease resistant. I imagine just about any will do as
temperature is not an issue nor are there any sensors to worry about. I
think permatex RTV Black is what a lot of folks use but I'm not positive.
>From: "A. S." <adakota4x4@hotmail.com>
>Reply-To: dakota-truck@buffnet.net
>To: dakota-truck@buffnet.net
>Subject: Re: DML: Advice on Limited Slip
>Date: Mon, 20 Mar 2000 07:37:16 PST
>
>Tom,
> Thanks for the response. When we checked the fluid level, it was just a
>'pull the plug and stick your finger in' check. Your idea was the same as
>mine, so we're going to pull both the front and rear covers off this week
>sometime and check for metal shavings in both.
>Any idea what RTV sealant to use to seal the covers back up?
>I was kinda hoping someone with an lsd could tell me whether theirs makes
>noise in most turns or not.
>Thanks.
>--Aaron--
>95 DSRC 4x4 V6
--Tom
'98 Kota 4x4 w/lots-o-goodies!
______________________________________________________
Get Your Private, Free Email at http://www.hotmail.com
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:52 EDT