As far as I know all that does is do a diagnostic test on the gauges and
lights. I have heard that with the '97's you can do the key on-off-on-off
or something like that. But not the '98's.
Chris Oertell
Arcadia, Ca
coertell@earthlink.net
http://home.earthlink.net/~coertell
1998 Dodge Dakota Sport V6 Regular Cab Emerald Green
1989 Kawasaki EX500
----- Original Message -----
From: "Nate Johnson" <natedak2k@yahoo.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, March 22, 2000 6:50 AM
Subject: Re: DML: How to check codes on a '98???? (2000 procedure)
> This doesn't help YOU out directly but it could help out some other folks.
> On the 2000's, push in and hold the "trip/reset" button in the instrument
> panel, then turn the key to on while still holding the button. Keep
> holding the button until it says "chec" in the odometer. Release the
> button and it goes through a "diagnostic check" of some sort.
>
> |I thought some posted a while back how to still pul the codes. Might want
> |to
> |check the archives. I belive they are displayed in the lcd odometer
> |dislpy on the
> |98 $ 99's. I have no idea abouth the 00's.
> |
> |Jeff Durling
> |'96 RC Sport-318
>
>
> =====
> Nate, Ogden UT
> http://www.geocities.com/natedak2k
> Forest Green 00 Dakota CC 4X4, 5-speed, LSD, 3.92 Rear, 4.7L/287ci, Po'boy
cold air w/ K&N, Extang BlackMax Tonneau
> "D2K"
>
> __________________________________________________
> Do You Yahoo!?
> Talk to your friends online with Yahoo! Messenger.
> http://im.yahoo.com
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:49:58 EDT