DML:Mike's Cam specs: was---> Pistons

From: mike d. (miggitymike@juno.com)
Date: Fri Mar 24 2000 - 18:51:48 EST

Next message: Dakota287@aol.com: "Re: Re: 97 4x4 318 PIC"
Previous message: mike d.: "SCOTT MILLER!!!"
Next in thread: John Mautz: "RE: Mike's Cam specs: was---> Pistons"
Reply: John Mautz: "RE: Mike's Cam specs: was---> Pistons"
Reply: Mike Schwall: "Re: DML:Mike's Cam specs: was---> Pistons"
Maybe reply: Kurt Swanson: "RE: DML:Mike's Cam specs: was---> Pistons"
Maybe reply: mike d.: "Re: DML:Mike's Cam specs: was---> Pistons"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

here are the cam specs:
Degrees Duration
@ .050 Int./Exh.
240/208

Degrees Advertised
Duration Int./Exh.
      260/264

Degree Lobe Separation
      114

Open/Close @.050"
Cam Lift Int./Exh.
(7) 31
43 (15)

Lash Hot
Int./Exh.
.000/.000

Gross Lift
Int./Exh.
.458/.467

-mike d.
________________________________________________________________
YOU'RE PAYING TOO MUCH FOR THE INTERNET!
Juno now offers FREE Internet Access!
Try it today - there's no risk! For your FREE software, visit:
http://dl.www.juno.com/get/tagj.

Next message: Dakota287@aol.com: "Re: Re: 97 4x4 318 PIC"
Previous message: mike d.: "SCOTT MILLER!!!"
Next in thread: John Mautz: "RE: Mike's Cam specs: was---> Pistons"
Reply: John Mautz: "RE: Mike's Cam specs: was---> Pistons"
Reply: Mike Schwall: "Re: DML:Mike's Cam specs: was---> Pistons"
Maybe reply: Kurt Swanson: "RE: DML:Mike's Cam specs: was---> Pistons"
Maybe reply: mike d.: "Re: DML:Mike's Cam specs: was---> Pistons"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Mail actions: [ respond to this message ] [ mail a new topic ]

This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:01 EDT