At 07:30 PM 4/4/00 -0500, you wrote:
[...]
> > The only intake that will bolt on to our daks is the single plane
> > "MPI" manifold. The part number is P5249816. In actuality, you will
>
>Actually - I know of at least 3 more in addition to P5249816 - they are:
>
>P5249500 - Dual Plane - Just like the MPI but without the injector bosses
>machined. This is the same intake that comes on the 300hp Magnum crate motor.
>P5249501 - Single Plane - Just like the MPI but without the injector bosses
>machined. This is the same intake that comes on the 380hp Magnum crate motor.
>P4876615 - This is also referred to as an MPI but for Passenger Cars. It
>supposedly mounts the throttle linkage on the Left/Drivers side.
Sorry about that; I should have been more clear. By "bolt on" I was
referring to an intake that you can basically drop on the truck without
modifying. Its true that all of those others will fit, but they would need
to have their injector bosses drilled out and a TB adaptor (as you mentioned).
-Jon-
.--- jon@dakota-truck.net -- or -- stei0302@cs.fredonia.edu ------------.
| Jon Steiger * AOPA, DoD, EAA, MP Race Team, NMA, SPA, USUA * RP-SEL |
| '92 Ram 150 4x4 V8, '96 Dakota V8, '96 Intruder 1400, '96 FireFly 447 |
`---------------------------- http://www.cs.fredonia.edu/~stei0302/ ---'
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:36 EDT