Set the rocker arm to 0 lash and turn it just a hair more (no more than 1/4
turn). Others recommend setting it to 0 lash at TDC. That's how it was set
on my truck with the Crower set.
- Bernd
----- Original Message -----
From: <Dester223@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Wednesday, April 05, 2000 1:14 AM
Subject: DML: dude. help is needed bad!
> okay,
> I got my stud conversion kit for my roller rockers and my chevy 1.6
ratio
> 3/8 stud rollers in.
>
> I install it, Torque all the rollers down to 20 pounds of torque (which
my
> friend who is a chevy freak, says is wrong) and after putting everything
> back together...
>
> I tried to start it up and the motor just winds. really fast...
basically,
> I think all my valves are open and it doesn't have any compression. For
> those who have installed roller rockers. how did you guys put on the top
bolt
> with the allen screw in it? Please help... my truck's all apart and I
need
> it in about 6 hours.
> -Dester
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:36 EDT