Re: Re: Re: RE: Re: dude. help is needed bad!

From: TEDSDAKOTA@aol.com
Date: Wed Apr 05 2000 - 17:23:38 EDT


In a message dated 4/5/2000 1:51:04 PM Pacific Daylight Time,
rtdkota@yahoo.com writes:

<< Crower instructions talk about going 1/2 to 3/4...
> Hmmm.. >>
        This ia from Kammer & Kammer

    adjust rockers at .000 lash it takes a good feel to do this, if you have
not done this find somebody that has adjusted chev hyd lifters this way you
will also get more rpm
-.010 to +.004 it does not need to be that close but the closer to .000 the
better

BOB KAMMER

                        Ted O.
    99 SLT + 4X4, Powerdyne SC'er, Leach headers, Gibson stainless catback,
TransGo shift kit, R&D TB, K&N, Taylor wires, Autolite 3923's, 4.10's front
and rear, Hoosier Drag slicks, Msd Boost retard ignition, Auto meter Boost
gauge, Beer cooler...1.7 roller rockers...24# injectors...M1 intake manifold,
Soon electric fans, then Nitrous...



This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:36 EDT