At 10:20 PM 4/4/2000 , you wrote:
> I'd think you ought to be able to buy a high quality set of jumper cables
>and cut them to length to use.....
Look up a welding supply shop in your yellow pages, or equivalent. They
will have all the cable and size you need and they will have the proper
connectors, or bring in your own and I'm sure they have the tool to crimp them.
Anything less than 2 ga is not enough for a V8, to be on the safe
side. The least amount of resistance the better.
Mike
__________________________
mschwall@flash.net
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:36 EDT