The Paxton kit does come with the ($250) polished airhat. (Kinda expensive
if ya ask me.) I had originally received basically the same reply. Since I
used to deal with them on a professional level, I was able to get the part
numbers and some of the "fabrication" procedures from them. It's mainly the
airtube since the V6 sits forward slightly. The brackets should fit...but I
haven't officially tested that out yet.
- Bernd
----- Original Message -----
From: <Dester223@aol.com>
To: <dakota-truck@buffnet.net>
Sent: Friday, April 07, 2000 12:07 AM
Subject: Re: DML: Re: Paxton S/C, will it fit?
> Hehe. I called paxton up alright.. here's their reply.
>
> "well, we haven't produced a kit for the v6 dakota yet, but the bracket
from
> the 360 will also fit the 318. Thanks and have a nice day"
>
> ah.. now I need a new "air hat" Gutting it out really weakens it.
> -Dester
>
> << Not at all. You can adjust the boost on the Paxton's with a simple
pulley
> change. Start with 6psi though. Paxton does have a kit (which I had
posted
> the P/N# for a while ago) and they stated on the phone to me that "with
> minor fabrication" it can be fitted to the V6. Main modification is the
> intake tube.
>
> Give them a call just to be safe though.
>
> - Bernd >>
>
This archive was generated by hypermail 2b29 : Fri Jun 20 2003 - 11:50:37 EDT